 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 5A S7AH-05C / V7AH-05C Series * * * * * * * * * Nonisolated Compact, low profile surface mount package Fixed frequency High efficiency means less power dissipation Excellent thermal performance Optimized for cost Remote on/off Undervoltage lockout (UVLO) Over current and short circuit protection POWER PRODUCTS BP02x7AH-05C Description The Bel S7AH-05C and V7AH-05C modules are a series of non-isolated, step down DC/DC power converters that operate from a nominal 3.3V source. These converters are available in a range of output voltages from 1.2V to 2.5V. They are packaged in a compact, overmolded package rated at 5A. Optional lead forming provides a vertical mount product for minimal footprint or a surface mount option for a very low profile. Standard features include remote on/off, over current and short circuit protection, and output voltage adjust. These products may be used almost anywhere low voltage silicon is employed and a 3.3V source is available. Typical applications include file servers, routers, line cards and other computing and communications equipment. Applications * * * * Distributed power architectures Data networking equipment Telecommunications Computers and peripherals Part Number Selection Output Voltage 2.5V 1.8V 1.5V 1.2V Input Voltage 3.3V 3.3V 3.3V 3.3V Max. Output Current 5A 5A 5A 5A Max. Output Power 12.5W 9.0W 7.5W 6W Typical Efficiency 91% 88% 86% 83% Part Number Surface Mount S7AH-05C250 S7AH-05C180 S7AH-05C150 S7AH-05C120 Part Number Vertical Mount V7AH-05C250 V7AH-05C180 V7AH-05C150 V7AH-05C120 (c)2002 Bel Fuse Inc. Specifications subject to change without notice. 11.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 1 POWER PRODUCTS BP02x7AH-05C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 5A Absolute Maximum Ratings Parameter Continuous Input Voltage Output Enable Terminal Voltage Ambient Temperature Storage Temperature Symbol Vin Vouten Tamb Tstor Min -0.3 -0.3 -40 -40 Typical Max 6 6 85 105 Unit V V C C Note: Use beyond the maximum ratings may cause a reliability degradation of the DC/DC converter or may permanently damage the device. Input Specifications Parameter Operating Input Voltage Input Current 2.5V 1.8V 1.5V 1.2V No Load Input Current Remote Off Input Current Input Reflected Ripple Current1 Input Reflected Ripple Current (P-P)1 I2t Inrush Current Transient Turn On Voltage Threshold Turn Off Voltage Threshold All All All All All 2.6 2.5 All 3 30 100 0.0005 Module All Symbol Vin Iin 4.8 4.0 3.5 3.0 90 10 45 150 0.001 2.7 mA mA mArms mApk A2s V V Min 3 Typical Max 3.6 Units V A Note: Input capacitance 270F/16V, ESR = 0.03 max at 100kHz @ 25 C. 1. With simulated source impedance of 500nH, 5Hz to 20MHz. (c)2002 Bel Fuse Inc. Specifications subject to change without notice. 11.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 2 NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 5A POWER PRODUCTS BP02x7AH-05C Output Specifications Parameter Output Voltage Set Point 1 2.5V 1.8V 1.5V 1.2V Load Regulation Line Regulation Regulation Over Temperature Total Output Voltage Regulation Output Ripple and Noise 2 Output Ripple and Noise 2 Output Current Range Output DC Current Limit Shor t Circuit Surge 2.5V 1.8V 1.5V 1.2V Turn on Time Overshoot at Turn On Output Capacitance Transient Response 3 V 50% to 100% of Max Load Settling Time All V 100% to 50% of Max Load Settling Time Ts 80 80 170 120 mV s Ts 80 80 170 120 mV s All All All Cout 0 Ton All All All All All All All All Iout Ioutlim Ioutsurge 0.07 0.07 0.07 0.07 7 0 0.1 0.1 0.1 0.1 15 1 2200 ms % F 0 6 Module Symbol Vout 2.450 1.764 1.470 1.176 2.500 1.800 1.500 1.200 5 3 20 11 30 10 2.550 1.836 1.530 1.224 10 5 30 20 80 20 5 10 mV mV mV mV mVp-p mVrms A A A 2s Min Typical Max Units V Note: All specifications are typical at nominal input, full load at 25 C unless otherwise stated. 1. Vin = 3.3V, Iout = full load, Ta = 25 C. 2. 0 - 20MHz, 1F ceramic cap and 10F aluminum cap on output. 3. di/dt = 0.5A/1S, Ta = 25 C without external load capacitance. (c)2002 Bel Fuse Inc. Specifications subject to change without notice. 11.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 3 POWER PRODUCTS BP02x7AH-05C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 5A General Specifications Parameter Efficiency1 2.5V 1.8V 1.5V 1.2V Switching Frequency Output Voltage Trim Range2 2.5V 1.8V 1.5V 1.2V Weight All 90 90 90 90 4.9 105 110 110 110 g All Fsw Module Symbol 89 86 84 81 570 91 88 86 83 600 630 kHz % Min Typical Max Units % 1. Vin=3.3V, full load and Ta=25 C. 2. See graphs on pages 10-12. Control Specifications Parameter Remote On/Off 3 Signal Low (Unit Off) Signal High (Unit On) Module All All All Symbol Vouten -0.3 1.8 1 3.6 Min Typical Max Units V V V 3. With remote on/off pin 1 open, the module is on. (c)2002 Bel Fuse Inc. Specifications subject to change without notice. 11.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 4 NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 5A POWER PRODUCTS BP02x7AH-05C Efficiency Data Module 2.5V Module 1.8V 96% 94% 92% Efficiency 3.0V 3.3V 3.6V 94% Efficiency 92% 90% 88% 86% 1 2 3 Output Current 4 5 90% 88% 86% 84% 82% 1 2 3 Output Current 4 5 3.0V 3.3V 3.6V Module 1.5V Module 1.2V 92% 90% 88% 86% 84% 82% 80% 1 2 3 Output Current 4 5 3.0V 3.3V 3.6V 89% 88% 87% 86% 85% 84% 83% 82% 81% 80% 79% 78% 1 2 3 Output Current 4 5 Efficiency Efficiency 3.0V 3.3V 3.6V Note: On/off pin designed to work with an open collector/drain switch. (c)2002 Bel Fuse Inc. Specifications subject to change without notice. 11.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 5 POWER PRODUCTS BP02x7AH-05C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 5A Ripple and Noise 1F ceramic cap and 10F aluminum cap added at the output. Ripple and noise at full load and 3.3Vdc input, 2.5Vdc output and Ta=25 C Ripple and noise at full load and 3.3Vdc input, 1.8Vdc output and Ta=25 C Ripple and noise at full load and 3.3Vdc input, 1.5Vdc output and Ta=25 C Ripple and noise at full load and 3.3Vdc input, 1.2Vdc output and Ta=25 C (c)2002 Bel Fuse Inc. Specifications subject to change without notice. 11.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 6 NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 5A POWER PRODUCTS BP02x7AH-05C Transient Response Transient response: di/dt = 0.5A/S, no external load capacitance Vout=2.5V 50% to 100% load transients at 3.3V input and Ta=25 C Vout=2.5V 100% to 50% load transients at 3.3V input and Ta=25 C Vout=1.8V 50% to 100% load transients at 3.3V input and Ta=25 C Vout=1.8V 100% to 50% load transients at 3.3V input and Ta=25 C (c)2002 Bel Fuse Inc. Specifications subject to change without notice. 11.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 7 POWER PRODUCTS BP02x7AH-05C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 5A Transient Response Transient response: di/dt = 0.5A/S, no external load capacitance Vout=1.5V 50% to 100% load transients at 3.3V input and Ta=25 C Vout=1.5V 100% to 50% load transients at 3.3V input and Ta=25 C Vout=1.2V 50% to 100% load transients at 3.3V input and Ta=25 C Vout=1.2V 100% to 50% load transients at 3.3V input and Ta=25 C (c)2002 Bel Fuse Inc. Specifications subject to change without notice. 11.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 8 NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 5A Thermal Considerations S7AH-05C POWER PRODUCTS BP02x7AH-05C V7AH-05C (c)2002 Bel Fuse Inc. Specifications subject to change without notice. 11.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 9 POWER PRODUCTS BP02x7AH-05C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 5A Output Voltage Set-Point Adjustment Trim Down Test Circuit Vo Trim Up Test Circuit Vo Trim Trim Gnd Gnd Output Voltage Set-Point Adjustment x7AH-05C250 Trim Resistor Calculation Rtrim down = ( 9.5565 - 20.32) Kohm Vo - Vo, adj Rtrim up = ( 4.496 - 14.7) Kohm Vo, adj - Vo (c)2002 Bel Fuse Inc. Specifications subject to change without notice. 11.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 10 NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 5A Output Voltage Set-Point Adjustment x7AH-05C180 Trim Resistor Calculation POWER PRODUCTS BP02x7AH-05C Rtrim down = ( 3.8488 - 18.54) Kohm Vo - Vo, adj Rtrim up = ( 3.064 - 14.7) Kohm Vo, adj - Vo x7AH-05C150 Trim Resistor Calculation Rtrim down = ( 2.6977 - 15.33) Kohm Vo - Vo, adj Rtrim up = ( 3.064 - 11.5) Kohm Vo, adj - Vo (c)2002 Bel Fuse Inc. Specifications subject to change without notice. 11.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 11 POWER PRODUCTS BP02x7AH-05C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 5A Output Voltage Set-Point Adjustment x7AH-05C120 Trim Resistor Calculation Rtrim down = ( 0.8501 - 6.79) Kohm Vo - Vo, adj Rtrim up = ( 1.72 - 4.64) Kohm Vo, adj - Vo (c)2002 Bel Fuse Inc. Specifications subject to change without notice. 11.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 12 NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 5A Mechanical S7AH-05C POWER PRODUCTS BP02x7AH-05C Suggested PCB Pad Layout 0.400 [10.16] 0.065 [1.65] 0.60 [15.24] 0.050 [1.27] 0.855 [21.72] 0.110 [2.79] 0.70 [17.78] R0.015 [R0.38] typ 0.100 [2.54] R0.008 [R0.20] typ 0.012 [0.30] 0-5 0.004 [0.10] 0.050 [1.27] 0.400 [10.16] 0.100 [2.54] 4x 0.320 [8.13] 0.020 [0.51] 0.055 [1.40] 2x 0.090 [2.29] 2x 0.780 [19.81] Dimensions are in inches [millimeters]. Standard dimension tolerance is 0.005 [0.13] unless otherwise noted. Pin 1 2 3 4 5 6 7 Function Remote On/Off +Vin Ground +Vo Trim No Connection No Connection 7 6 12345 (c)2002 Bel Fuse Inc. Specifications subject to change without notice. 11.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 13 POWER PRODUCTS BP02x7AH-05C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 5A Mechanical V7AH-05C 0.700 [17.78] 0.600 [15.24] 0.050 [1.27] 0.265 [6.73] min 0.050 [1.27] 0.100 [2.54] 0.400 [10.16] 0.020 [0.51] 0.308 [7.82] Dimensions are in inches [millimeters]. Standard dimension tolerance is 0.005 [0.13] unless otherwise noted. Pin 1 2 3 4 5 Function Remote On/Off +Vin Ground +Vo Trim 12345 (c)2002 Bel Fuse Inc. Specifications subject to change without notice. 11.02 CORPORATE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 14 |
Price & Availability of S7AH-05C120
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |